ACCL Automatic Source Changeover

Description : 

• ACCL is used for efficient distribution of generator power in high rise apartments, townships, commercial buildings, etc without overloading the generator.
• The ACCL will switch the load to generator supply during failure of mains supply. It also acts as a current limiter when load on generator exceeds the pre-set limit thus avoiding any overload on the generator.

Specifications :

• Unique - patented design - Contactor based ACCL
• Heavy Duty - AC 32A and AC22A utilization category
• Long life - 25000 operations
• Safe - 5 kA short circuit capacity Tested at Third party lab
• Energy efficient - Low Power consumption as coil operates only during DG
• Cool - Low Temp rise as power consumed is less than 0.2VA on EB
• User friendly - even during overload, load will be On for 10 sec so that user gets some time to switch off unwanted loads. Beep & LED indication.
• Proven - Tested at third party (UL LAB)
• Technically sound - Break before make due to higher air gap
• Convenient - Auto Reset Facility
• Versatile - Can be used in new buildings as well as for retrofitting (i.e 2 Sub main or 1 Sub main wiring method)